Haier HL26K1 Instruções de Operação descarregar pdf (Página 35)

Owner s Manual 35

Operation

Remote Control

5. When the device turns ON, press and release ENTER key to program the remote with the

new code, saving the code and exit. To exit without programming, press any key other

except CH+/CH- and ENTER. LED will be off after manually scan mode is exit.

6. If the device responds, no further programming is required. If the device does not respond,

repeat step 1 through 5.And searching will start from current code set. If no key was

pressed in 30 seconds, manually scan mode will be automatically exit.

7. After searching the entire data base, this mode will be automatically exited and led will

blink for 3 times.

Remote

emote

ENTER

ENTER emote

ENTER

emote

ENTER

emote

Automatic Scan Programming the

To automatic scan program the r :

1. Manually turn OFF the device you wish to power scan. (TV, DVD, VCR, STB, cable box or

audio equipment).

2. Press SELECT key to choose the device you wish to program.

While Press and holding key, press SELECT key and device LED will be ON. Keep

the status for about 5 seconds, release both keys and then LED will blink twice per second,

indicating that the Control is ready for programming.

3. Press and release MUTE key to enter automatic scan mode. And the remote will

automatically sending power codes to the device.

4. When the device turns ON, press key to program the r with the new code, saving

it and exit. To exit without programming, press any key other except key.

5. If the device responds, no further programming is required. If the device does not respond,

repeat steps 1 through 4. And search will start from current code set.

6. After searching the entire data base, this mode will be automatically exited and led will blink

for 3 times.

Punch-Through Features

The remote provides two punch-through features that allow users to control TV volume and

DVD or VCR operation while the remote is in another device mode control certain features of

another device.

Volume Punch-Through:

The TV Volume/Mute punch-through feature allows you to control the volume and mute function

of your TV while the r is in another device mode. The feature is applicable for all devices

and brands that do not use the volume control buttons for other purposes.

Transport Key Punch-Through:

The DVD or VCR transport key punch through feature lets you r the PLAY, STOP, PAUSE,

REWIND, FF and RECORD functions of your DVD or VCR while the control operates in other

modes. The feature is applicable for all devices and brands that do not use the transport keys

for other purposes.

Protection mode

1. While press and holding , press FREEZE key for 5 seconds to enter protection mode. In

this mode, all the above programming methods will be invalid.

2.To exit protection: While press and holding , press FREEZE key. Current device related

LED remains ON and then release and FREEZE. Input three digit password 8 8 8 , LED

turns off and protection mode is ended. If error password is input or no password input in 10

seconds, LED blinks three times and then turns off. Protection mode will remain.

Display mode

1.To enter display mode, while press and holding key, press SELECT key and device

LED will be ON, keep the status for about 5 seconds. Release both keys and then LED will

blink 2 times per second, indicating r is ready for programming.

2.Sequence press 9, 8, 0 to enter display mode. And LED is off now.

3.Press digit 1 key to get the first digit of current code set. For example, if the first digit of code

set is 1, so then led will blink once and remains OFF. Digit 0 in code set will not be displayed.

Blink twice per second.

4.Press digit 2 key to get the second digit of current code set. For example, if the second digit

of code set is 3, so then led will blink three times and remains OFF. Blink twice per second.

5.Press digit 3 key to get the third digit of current code set. Blink twice per second.

6.Only digit 1, 2, 3 are valid in this mode. And the sequence is not fixed. You can repeat, if you

don't remember clearly.

7.R will not send out data in this mode if user presses any keys other than digit 1, 2, 3.

And this can be regarded as no key pressed.

8.If no key was pressed in 10 seconds or any key other than digit 1, 2, 3 is pressed display

mode is ended.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 43 44

Comentários a estes Manuais

Sem comentários

Haier HL26K1 Instruções de Operação Página 35

Comentários a estes Manuais

Manuais e produtos relacionados com TVs LCD Haier HL26K1